Home/Application Step Form - CPC31320 Certificate III in Wall and Floor Tiling – RPL

CPC31320 Certificate III in Wall and Floor Tiling – RPL

Your pathway to a building licence could be quicker than you think!

NATIONALLY RECOGNISED TRAINING

Application Form

Please complete this form to help us assess your application. The first step is to provide your contact details so that we can provide feedback on your application and potential enrolment into this course.

All questions are mandatory unless otherwise noted.

Contact Details

Given Name(s)*:

Last Name*:

Mobile number*:

Email address*:

Date of birth(optional):

Residential Address

Street address*:

Suburb*:

State*:

Postcode*:

Citizenship Status

Which of the following describes your citizenship/residence status?

Australian Citizen

New Zealand Citizen

Permanent Resident

Hold a Visa

None

Please indicate visa type and number:

Master Builders Representative

If known, please provide the name of the representative you've spoken to about the course (optional):

Please fill out all mandatory fields.

Application Form

Please answer these questions to help us ensure that your industry experience meets the entry requirements of our qualification program.

By using this application process, we aim to ensure that we can provide the best outcomes for you to apply to your future construction projects.

All questions are mandatory unless otherwise noted.

Industry Experience

How many years of experience do you have in the building and construction industry?

Less than 1 year

1 - 3 years

3 - 5 years

5 - 10 years

More than 10 years

Which qualifications do you already hold? Please select all that apply.*

None

Certificate I

Certificate II

Trade Certificate III

Certificate IV

Diploma / Advanceed Diploma

University Degree

Other training not listed here (please provide more details below)

Employment History

If you hold a current Contractor Licence issued by NSW Fair Trading, please enter your Contractor Licence Number (optional) :

Licence Number

What is your current employment status?*

Full or part-time employee

Self-employed

Unemployed

Current or Most Recent Role

What is/was your job title?*

What is/was the name of your employer?*

Provide a brief description of your responsibilities in this role:*

How long have/did you work in this role?*

Less than 1 year

1 - 3 years

3 - 5 years

5 - 10 years

More than 10 years

Previous Role*

What was your job title?*

What was the name of your employer?*

Provide a brief description of your responsibilities in this role:*

How long did you work in this role?

Less than 1 year

1 - 3 years

3 - 5 years

5 - 10 years

More than 10 years

Referees

Please provide the name and phone numbers of two referees.

If your current employer has suggested that you apply for this training, please ensure that you identify this person as Referee #1.

Referee #1 Name*:

Referee #1 Phone*:

Referee #2 Name*:

Referee #2 Phone*:

Please fill out all mandatory fields.

Welcome to your Application Form Part 2 and Technical Industry Questions – Certificate III in Wall and Floor Tiling

The industry experience questions below provide an indication of the types of tasks you will be required to provide evidence for in an assessment.
Consider each task described and select your answer on how regularly you perform this task safely within tolerance and without defect on the job. Consider this in respect of the last 2 years, as well as what is predicted in the next 6 months.
To meet our entry requirements you must successfully complete the Technical Industry questionnaire to proceed to enrolment.
Allow up to 20 minutes to complete the entire Application Form.
Provide accurate and honest responses.

Prepare the work area and equipment for workplace operations for the day.

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Actively participate in a team toolbox talk/meeting on the work site. Record notes of this meeting.

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Site Set Out and Levelling Level building on a site with fall using below devices. Spirit level Optical or Dumpy level Water technique Laser level

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Concrete and reinforcement Place and fix reinforcement materials including deformed bars, rods and mesh sheets. Carry out concreting to simple form slabs.

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Scaffolding and working at heights Erect and dismantle up to 4m of scaffolding with bays and returns, ladder and edge protection. Works safely at heights

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Apply waterproofing To internal and external areas prior to tiling

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Prepare surfaces for tiling Framed bathroom wall and floor Masonry bathroom wall and floor

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Wall tiles Around bath and door openings Niches, mitred hobs and to external corners

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

Floor tiles Lay with fall and waterproofing Floor with movement joints and large format tiles Laid in diagonal with half tile border Stops, including treads Cut tiles around circular floor grates

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

10.

Repair wall and floor tiles Repair to tiles installed to waterproofing

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

11.

Decorative tiling Finished to different heights, different sizes and decorative borders to floor

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

12.

Mosaic tiling Mosaic tiling to wall, niche, hob and return, shower floor with fall, including drain.

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

13.

Tile curved surfaces Archways and Columns

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

14.

Demolition project Remove ceilings, walls, fixtures and fittings from a non-load bearing structure

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

15.

Housekeeping Clean the work area after the completion of work tasks outlined in previous observation tasks and complete minor equipment maintenance where required.

Weekly

Monthly

Every 3 months

Once or twice a year

Rarely or never

None

16.

Why is it important to prime Fibre Cement (FC) sheeting prior to tiling?

A primer satisfies the absorbency of the surface and also seals contaminants that may prevent following adhesives from bonding

A primer is not required as modern tile adhesives are all self priming

A primer is only required on external surfaces that are to be tiled

To seal in moisture

None

17.

Explain the importance of matching manufacturers' components and materials when selecting a bonding system.

This is not required as long as water based and solvent based products are not mixed

This is only a requirement if a customer requests it

To not do so risks using incompatible materials which may result in system failure and may also void a manufacturers warranty.

This is only a requirement if the job is over $5000

None

18.

What are the reasons for determining an appropriate grid pattern prior to laying wall or floor tiles?

A properly determined grid pattern ensures a symmetrical and balanced job which is pleasing in appearance and also minimises waste.

This is only required on small jobs where set out is more noticeable

If the grout colour is similar in colour to the tiles this is not important as the set out will be less noticeable

Only do this if specified by the builder / client

None

19.

Why is it important to ensure a bottom course of wall tiles are cut and fixed to create a rake or square corner?

This is not important as the floor should be level and walls vertical

To not do so will void a manufacturers warranty

To ensure following courses run level and true

This is only important if an entire wall is to be tiled

None

20.

What is a common cause of inconsistent colouring of wall and floor tiling grouts?

Using a grout from a different manufacturer to the tiles

Not mixing the grout as a single mixture for the job as different mixtures can result in colour variations.

Not applying the grout with a rubber squeegee

Adding an additive that allows flexibility in the grout

None

21.

When grouting the internal corners between two walls or the internal corner where a wall and floor meet you must –

Always add a grout additive as this makes it more flexible can resist the movement of the building that is caused by expansion and contraction

Never apply gout to these joins as expansion and contraction movement will cause the grout to crack and fall out, silicone should be used.

Only apply the grout by a rubber squeegee to ensure sufficient grout fills the join

Only use a pre mixed grout

None

22.

According to AS3740-2010, what is the minimum fall recommended for a shower floor?

1:80

1:60

1:120

1:1

None

23.

When waterproofing an internal wet area, what is the purpose of a bond breaker?

Bond breakers improve membrane adhesion in corners and this is required due to high movement in these areas

A bond breaker is not required if a surface is suitable primed as this ensures adequate adhesion of the membrane

A bond breaker serves the same purpose of joint sealant

Bond breakers allow a waterproofing membrane to stretch, rather than snap which would result in membrane failure

None

24.

What is the most accurate method of determining the moisture content of a screeded sand and cement bathroom floor prior commencing the waterproofing and tiling process?

Place a plastic bag on the surface and the next day check for moisture that has risen to the surface

With the use of and electronic moisture meter

Physically touch the surface and feel for dampness

This is the builders responsibility as this should be covered under their insurance

None

25.

When tiling a curved surface such as a column, how could you set out the job to ensure conformity of the tiles to the surface?

By visually inspecting the substrate for level and plumb

With the aid of a template

By applying more adhesive to ensure at least 75% of coverage to the rear of the tile

By applying the correct primer

None

Time's up

Contact Details
Industry Experience
Technical Quiz

Input data will be lost, are you sure you want to leave?

Yes

CPC31320 Certificate III in Wall and Floor Tiling – RPL

Application Form

Contact Details

Residential Address

Citizenship Status

Master Builders Representative

Application Form

Industry Experience

Employment History

Current or Most Recent Role

Previous Role*

Referees

Subscribe to the MBA Education & Skills Newsletter

Modal title